You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 38 Next »

Error rendering macro 'excerpt-include'

No link could be created for 'Armor Complete users (snippet)'.

If you are an upgraded user, then any L2L VPN tunnel that you created in Generation 3 (my.armor.com) will be not be displayed in the Armor Management Portal (AMP).

If you need to modify a Generation 3 L2L VPN tunnel, please contact Armor Support via a support ticket.



Create an L2L VPN tunnel with a new workload 

You must first create a workload before you can create an L2L VPN tunnel.

  1. In the Armor Management Portal (AMP), in the left-side navigation, click Infrastructure
  2. Click L2L VPN.
  3. If you have virtual machines in various data centers, then click the corresponding data center. 
  4. Click New L2L.
  5. In Tunnel Name, enter a descriptive name. 
  6. In Encryption Mode, select an encryption mode. You can select between Advanced Encryption Standard or Data Encryption Standard
  7. In Pre-Shared Key, click Generate or create your own key. You will use this key to securely connect to your local endpoint. 
    • If you create your own key, this key must contain the following requirements:
      • 16 to 96 characters
      • One lower-case letter
      • One upper-case letter
      • One number
  8. In Remote Peer IP Address, enter your VPN peer IP address. 
  9. In Remote Host/Networks (CIDR), enter your LAN encryption domain, and then click the plus ( + ) sign. 
  10. In Local Host/Networks (CIDR), enter the Armor LAN encryption domain, and then click the plus ( + ) sign. 
    • This information is the same as your secure cloud server IP address at Armor. 
  11. Click Save L2L

Edit an L2L VPN tunnel

  1. In the Armor Management Portal (AMP), in the left-side navigation, click Infrastructure
  2. Click L2L VPN.
  3. If you have virtual machines in various data centers, then click the corresponding data center. 
  4. Click the gear icon that corresponds to the desired L2L VPN tunnel, and then select Edit
  5. Make your desired changes, and then click Save L2L

Enable, disable, or delete an L2L VPN tunnel

  1. In the Armor Management Portal (AMP), in the left-side navigation, click Infrastructure
  2. Click L2L VPN.
  3. If you have virtual machines in various data centers, then click the corresponding data center. 
  4. Click the gear icon that corresponds to the desired L2L VPN tunnel, and then select Enable, Disable, or Delete.

Troubleshoot L2L VPN screen

If you do not see any data in the L2L VPN screen, consider that:

  • An L2L VPN was never created. 
  • You do not have permissions to view L2L VPN configurations.
    • You must have the Read Network L2L and Write Network L2L permissions enabled. Contact your account administrator to enable these permissions. To learn how to update you permissions, see Roles and Permissions (Armor Complete)