Page tree

Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  1. In the Armor user interface, on in the left-side navigation, click Infrastructure.
  2. Click IP Addresses
  3. If you have virtual machines in various data centers, then click the corresponding data center. 
  4. Click New Public IP
    • If you do not see New Public IP, but instead, you see Max Unassigned IPs, then you have reached your limit of unassigned public IP addresses. You cannot have more than five unassigned public IP addresses. 
  5. In Location, select a data center location. 

  6. In Quantity, select the desired amount. 
  7. Click Add IP Addresses. The newly created public IP address will be located at the top of the table. 

...

  1. In the Armor user interface, on in the left-side navigation, click Infrastructure.
  2. Click IP Addresses
  3. If you have virtual machines in various data centers, then click the corresponding data center. 
  4. Locate the desired IP address. 
  5. Click the gear icon that corresponds to the desired IP address. 
  6. Click Edit Assignments.  
  7. In Available Public IPs, select and move the desired IP address to Assigned Public IPs.  
  8. Click Save IP Assignment

...

  1. In the Armor user interface, on in the left-side navigation, click Infrastructure.
  2. Click IP Addresses
  3. If you have virtual machines in various data centers, then click the corresponding data center. 
  4. Locate the desired IP address. 
  5. Click the gear icon that corresponds to the desired IP address. 
  6. Click Edit Assignments.  
  7. In Assigned Public IPs, select and move the desired IP address to Available Public IPs.
  8. Click Save IP Assignment

...

  1. In the Armor user interface, on in the left-side navigation, click Infrastructure.
  2. Click IP Addresses
  3. If you have virtual machines in various data centers, then click the corresponding data center. 
  4. Locate the desired IP address, and then click the corresponding gear icon. 
  5. Click Delete
  6. Click OK

...

  1. In the Armor user interface, on in the left-side navigation, click Infrastructure.
  2. Click IP Addresses
  3. If you have virtual machines in various data centers, then click the corresponding data center. 
  4. Locate the desired IP address, and then click the corresponding gear icon. 
  5. Click Edit Assignments
  6. In Assigned Public IPs, select and move the desired IP address to Available Public IPs.
  7. Click Save IP Assignment
  8. In the table, locate the desired IP address, and then click the corresponding gear icon. 
  9. Click Delete
  10. Click OK.  

...